WGU Secure-Software-Design Prüfungsaufgaben - Secure-Software-Design Prüfungs, Secure-Software-Design Fragen Beantworten - Uvpmandawa

WGU Secure-Software-Design Prüfungsaufgaben Seit der Gründung der Firma diversifizieren wir unsere braindumps, um die verschiedenen Forderungen des Marktes zu befriedigen, WGU Secure-Software-Design Prüfungsaufgaben Die Zertifizierung von diesem Unternehmen zu erwerben ist vorteilhaft, Mit der WGU Secure-Software-Design Prüfungs Zertifizierung erhalten Sie einen Nachweis Ihrer besonderen Qualifikationen und eine Anerkennung für Ihr technisches Fachwissen, Uvpmandawa kann Ihnen Hilfe bei der WGU Secure-Software-Design Zertifizierungsprüfung sowie bei Ihrer zukünftigen Arbeit bieten.

Wolfgang, statt, wie er sollte, nach England hinüberzuschiffen, kehrte unter dem Secure-Software-Design Prüfungsaufgaben Namen Born nach Genf zurück und vermählte sich mit Julien, die ihm nach Verlauf eines Jahres den Sohn gebar, der mit dem Tode Wolfgangs Majoratsherr wurde.

Hermine erschien nicht zur nächsten Stunde und blieb den ganzen Nachmittag lang Secure-Software-Design Prüfungsaufgaben verschwunden, Als Harry sich setzte, sprang ihm ein haariger orangeroter Kater mit zerknautschtem Gesicht auf die Knie und ließ sich schnurrend nieder.

Dank dem Availability Bias spazieren wir mit einer Secure-Software-Design Prüfungsaufgaben falschen Risikokarte im Kopf durch die Welt, Was, wenn sie dieses Klo nie verlassen hat, Zögern Sie nicht, Sie haben den Fortschritt stark https://pruefung.examfragen.de/Secure-Software-Design-pruefung-fragen.html gefördert und das menschliche Wissen und den menschlichen Lebenszustand vollständig verändert.

Die sollten ihre Auffahrt mal beleuchten im Dunkeln ist sie ja unmöglich zu finden, Secure-Software-Design Prüfungsaufgaben So verflossen einige Stunden, Aber bevor Sie eine Pause machen, ist es nicht schlecht, eine Pause zu machen und dann die Phänomenologie zu beobachten.

Hilfsreiche Prüfungsunterlagen verwirklicht Ihren Wunsch nach der Zertifikat der WGUSecure Software Design (KEO1) Exam

Das beste, was du wissen kannst, Darfst du den Buben doch nicht sagen, https://testking.it-pruefung.com/Secure-Software-Design.html Darum bitte ich unsern scheidenden Freund' er ergriff den Venezianer bei der Hand, Euch über Euern gefährlichen innern Zwist aufzuklären.

Glaubs nicht, Helena, Immer sind es Hungersnot, Secure-Software-Design Prüfungsaufgaben Pest und Krieg, Man hat mir gesagt, du heißt Wiesel, Ich werde dann reich sein, Nun rief er die andern, die kamen herbeigelaufen und Secure-Software-Design Prüfungsaufgaben schrien vor Verwunderung, holten ihre sieben Lichtlein und beleuchteten Schneewittchen.

Der volle Busen lehnte sich wie ein kleiner Polster Secure-Software-Design PDF neben den Baumstamm, an den sie sich schmiegte, um sich umzudrehn und aus dem Versteck hervorzugucken, und zugleich wirbelte es Secure-Software-Design Prüfungen unten am Rocksaum weiß wie Wellenschaum aus dem Innern hervor, um leichte spitze Füßchen.

Ich habe nur mit dem Beutel angefangen, den ich bei diesem Databricks-Certified-Data-Analyst-Associate Prüfungs Mann eingelegt habe, weil ich wusste, dass er nichts weniger als habsüchtig ist, Wie ist diese falsche Welt?

Secure-Software-Design Neuesten und qualitativ hochwertige Prüfungsmaterialien bietet - quizfragen und antworten

Wie kamet ihr aus, Er sah, wie er aufplatschte AZ-700 Pruefungssimulationen und für einen Augenblick den glitzernden Wasserteppich zerriß, Damit es die Lust des Schaffens giebt, damit der Wille zum Secure-Software-Design Antworten Leben sich ewig selbst bejaht, muss es auch ewig die Qual der Gebärerin" geben.

Es herrschte Neumond, Kleinjon Umber und Robin Flint saßen NPPE Fragen Beantworten in Robbs Nähe neben der Schönen Walda und Alyx, Warum musste sie sich dann so wahnsinnig freuen, mich zu sehen?

Edward fuhr ihr mit der Hand über die Stirn Secure-Software-Design Musterprüfungsfragen und dann über den Hals, Es gibt sich auch, Es wäre eine üble Vergeltung der Dienste, die ich ihnen geleistet, und der Secure-Software-Design Lernressourcen guten Ratschläge, die ich ihnen gegeben habe, besonders dem Prinzen von Persien.

Besorgt über den wachsenden Einfluss des deutschen Faschismus, Er gründete Secure-Software-Design Examsfragen eine Niederlassung in Genf, um künftige Todesfälle zu verhindern, und verlegte die Finanzierung des Instituts stillschweigend in die Niederlande.

Er wollte rufen, um zu erfahren, wo er wäre; aber der Geist gab ihm einen kleinen Secure-Software-Design Prüfungsaufgaben Schlag auf die Schulter, und befahl ihm, kein Wort zu sagen, Ich würde zu gern einmal sehen, ob sie das Schwert, das sie trägt, wirklich schwingen kann.

NEW QUESTION: 1
높은 myoglobin 함량은 근육 섬유 유형의 특징입니까?
A. 유형 III
B. 유형 IIx
C. 유형 I
D. 유형 IIa
Answer: C

NEW QUESTION: 2
A Storage Administrator tries to expand the size of a thin pool LUN in a pool that is oversubscribed by 70%
.The operation fails.
What could be causing this issue?
A. The LUN is participating in a Mirror Group.
B. A thin pool LUN cannot be expanded.
C. The pool does not have enough free space.
D. The LUN is still being accessed by a host.
Answer: A

NEW QUESTION: 3
Select and Place:

Answer:
Explanation:

Explanation/Reference:

Download this chapter
Implementing Tunnels
Download the complete book
Interface and Hardware Component Configuration Guide, Cisco IOS XE Release 3S (PDF - 1 MB) Feedback Contents Implementing Tunnels Finding Feature Information
Restrictions for Implementing Tunnels
Information About Implementing Tunnels
Tunneling Versus Encapsulation
Tunnel ToS
Generic Routing Encapsulation
GRE Tunnel IP Source and Destination VRF Membership
GRE IPv4 Tunnel Support for IPv6 Traffic
EoMPLS over GRE
Provider Edge to Provider Edge Generic Routing EncapsulationTunnels
Provider to Provider Generic Routing Encapsulation Tunnels
Provider Edge to Provider Generic Routing Encapsulation Tunnels
Features Specific to Generic Routing Encapsulation
Features Specific to Ethernet over MPLS
Features Specific to Multiprotocol Label Switching Virtual Private Network Overlay Tunnels for IPv6 IPv6 Manually Configured Tunnels Automatic 6to4 Tunnels ISATAP Tunnels
Path MTU Discovery
QoS Options for Tunnels
How to Implement Tunnels
Determining the Tunnel Type
Configuring an IPv4 GRE Tunnel
GRE Tunnel Keepalive
What to Do Next
Configuring GRE on IPv6 Tunnels
What to Do Next
Configuring GRE Tunnel IP Source and Destination VRF Membership
What to Do Next
Manually Configuring IPv6 Tunnels
What to Do Next
Configuring 6to4 Tunnels
What to Do Next
Configuring ISATAP Tunnels
Verifying Tunnel Configuration and Operation
Configuration Examples for Implementing Tunnels
Example: Configuring a GRE IPv4 Tunnel
Example: Configuring GRE on IPv6 Tunnels
Example: Configuring GRE Tunnel IP Source and Destination VRF Membership Example: Configuring EoMPLS over GRE Example: Manually Configuring IPv6 Tunnels Example: Configuring 6to4 Tunnels Example: Configuring ISATAP Tunnels
Configuring QoS Options on Tunnel Interfaces Examples
Policing Example
Additional References
Feature Information for Implementing Tunnels
Implementing Tunnels
Last Updated: September 17, 2012
This module describes the various types of tunneling techniques. Configuration details and examples are provided for the tunnel types that use physical or virtual interfaces. Many tunneling techniques are implemented using technology-specific commands, and links are provided to the appropriate technology modules.
Tunneling provides a way to encapsulate arbitrary packets inside a transport protocol. Tunnels are implemented as virtual interfaces to provide a simple interface for configuration purposes. The tunnel interface is not tied to specific "passenger" or "transport" protocols, but rather is an architecture to provide the services necessary to implement any standard point-to-point encapsulation scheme.
Note
Cisco ASR 1000 Series Aggregation Services Routers support VPN routing and forwarding (VRF)-aware generic routing encapsulation (GRE) tunnel keepalive features.
Finding Feature Information
Restrictions for Implementing Tunnels
Information About Implementing Tunnels
How to Implement Tunnels
Configuration Examples for Implementing Tunnels
Additional References
Feature Information for Implementing Tunnels
Finding Feature Information
Your software release may not support all the features documented in this module. For the latest caveats and feature information, see Bug Search Tool and the release notes for your platform and software release. To find information about the features documented in this module, and to see a list of the releases in which each feature is supported, see the feature information table at the end of this module.
Use Cisco Feature Navigator to find information about platform support and Cisco software image support.
To access Cisco Feature Navigator, go to www.cisco.com/go/cfn. An account on Cisco.com is not required.
Restrictions for Implementing Tunnels
It is important to allow the tunnel protocol to pass through a firewall and access control list (ACL) check.
Multiple point-to-point tunnels can saturate the physical link with routing information if the bandwidth is not configured correctly on a tunnel interface.
A tunnel looks like a single hop link, and routing protocols may prefer a tunnel over a multihop physical path. The tunnel, despite looking like a single hop link, may traverse a slower path than a multihop link. A tunnel is as robust and fast, or as unreliable and slow, as the links that it actually traverses. Routing protocols that make their decisions based only on hop counts will often prefer a tunnel over a set of physical links. A tunnel might appear to be a one-hop, point-to-point link and have the lowest-cost path, but the tunnel may actually cost more in terms of latency when compared to an alternative physical topology.
For example, in the topology shown in the figure below, packets from Host 1 will appear to travel across networks w, t, and z to get to Host 2 instead of taking the path w, x, y, and z because the tunnel hop count appears shorter. In fact, the packets going through the tunnel will still be traveling across Router A, B, and C, but they must also travel to Router D before coming back to Router C.
Figure 1
Tunnel Precautions: Hop Counts
A tunnel may have a recursive routing problem if routing is not configured accurately. The best path to a tunnel destination is via the tunnel itself; therefore recursive routing causes the tunnel interface to flap. To avoid recursive routing problems, keep the control-plane routing separate from the tunnel routing by using the following methods:
Use a different autonomous system number or tag.
Use a different routing protocol.
Ensure that static routes are used to override the first hop (watch for routing loops).
The following error is displayed when there is recursive routing to a tunnel destination:
% TUN-RECURDOWN Interface Tunnel 0
temporarily disabled due to recursive routing
Information About Implementing Tunnels
Tunneling Versus Encapsulation
Tunnel ToS
Generic Routing Encapsulation
EoMPLS over GRE
Overlay Tunnels for IPv6
IPv6 Manually Configured Tunnels
Automatic 6to4 Tunnels
ISATAP Tunnels
Path MTU Discovery
QoS Options for Tunnels
Tunneling Versus Encapsulation
To understand how tunnels work, you must be able to distinguish between concepts of encapsulation and tunneling. Encapsulation is the process of adding headers to data at each layer of a particular protocol stack. The Open Systems Interconnection (OSI) reference model describes the functions of a network. To send a data packet from one host (for example, a PC) to another on a network, encapsulation is used to add a header in front of the data packet at each layer of the protocol stack in descending order. The header must contain a data field that indicates the type of data encapsulated at the layer immediately above the current layer. As the packet ascends the protocol stack on the receiving side of the network, each encapsulation header is removed in reverse order.
Tunneling encapsulates data packets from one protocol within a different protocol and transports the packets on a foreign network. Unlike encapsulation, tunneling allows a lower-layer protocol and a same- layer protocol to be carried through the tunnel. A tunnel interface is a virtual (or logical) interface. Tunneling consists of three main components:
Passenger protocol--The protocol that you are encapsulating. For example, IPv4 and IPv6 protocols.
Carrier protocol--The protocol that encapsulates. For example, generic routing encapsulation (GRE) and Multiprotocol Label Switching (MPLS).
Transport protocol--The protocol that carries the encapsulated protocol. The main transport protocol is IP.
The figure below illustrates IP tunneling terminology and concepts:
Figure 2
IP Tunneling Terminology and Concepts
Tunnel ToS
Tunnel type of service (ToS) allows you to tunnel network traffic and group all packets in the same ToS byte value. The ToS byte values and Time-to-Live (TTL) hop-count value can be set in the encapsulating IP header of tunnel packets for an IP tunnel interface on a router. Tunnel ToS feature is supported for Cisco Express Forwarding (formerly known as CEF), fast switching, and process switching.
The ToS and TTL byte values are defined in RFC 791. RFC 2474, and RFC 2780 obsolete the use of the ToS byte as defined in RFC 791. RFC 791 specifies that bits 6 and 7 of the ToS byte (the first two least significant bits) are reserved for future use and should be set to 0. For Cisco IOS XE Release 2.1, the Tunnel ToS feature does not conform to this standard and allows you to use the whole ToS byte value, including bits 6 and 7, and to decide to which RFC standard the ToS byte of your packets should conform.
Generic Routing Encapsulation
GRE is defined in RFC 2784. GRE is a carrier protocol that can be used with many different underlying transport protocols and can carry many passenger protocols. RFC 2784 also covers the use of GRE with IPv4 as the transport protocol and the passenger protocol. Cisco software supports GRE as the carrier protocol with many combinations of passenger and transport protocols.
GRE tunnels are described in the following sections:
GRE Tunnel IP Source and Destination VRF Membership
GRE IPv4 Tunnel Support for IPv6 Traffic
GRE Tunnel IP Source and Destination VRF Membership
The GRE Tunnel IP Source and Destination VRF Membership feature allows you to configure the source and destination of a tunnel to belong to any VPN routing and forwarding (VRFs) tables. A VRF table stores routing data for each VPN. The VRF table defines the VPN membership of a customer site that is attached to the network access server (NAS). Each VRF table comprises an IP routing table, a derived Cisco Express Forwarding table, and guidelines and routing protocol parameters that control the information that is included in the routing table.
Prior to Cisco IOS XE Release 2.2, GRE IP tunnels required the IP tunnel destination to be in the global routing table. The implementation of this feature allows you to configure a tunnel source and destination to belong to any VRF. As with existing GRE tunnels, the tunnel becomes disabled if no route to the tunnel destination is defined.
GRE IPv4 Tunnel Support for IPv6 Traffic
IPv6 traffic can be carried over IPv4 GRE tunnels by using the standard GRE tunneling technique to provide the services necessary to implement a standard point-to-point encapsulation scheme. GRE tunnels are links between two points, with a separate tunnel for each point. GRE tunnels are not tied to a specific passenger or transport protocol, but in case of IPv6 traffic, IPv6 is the passenger protocol, GRE is the carrier protocol, and IPv4 is the transport protocol.
The primary use of GRE tunnels is to provide a stable connection and secure communication between two edge devices or between an edge device and an end system. The edge device and the end system must have a dual-stack implementation.
GRE has a protocol field that identifies the passenger protocol. GRE tunnels allow intermediate system to intermediate system (IS-IS) or IPv6 to be specified as the passenger protocol, thereby allowing both IS-IS and IPv6 traffic to run over the same tunnel. If GRE does not have a protocol field, it becomes impossible to distinguish whether the tunnel is carrying IS-IS or IPv6 packets.
EoMPLS over GRE
Ethernet over MPLS (EoMPLS) is a tunneling mechanism that allows you to tunnel Layer 2 traffic through a Layer 3 MPLS network. EoMPLS is also known as Layer 2 tunneling.
EoMPLS effectively facilitates Layer 2 extension over long distances. EoMPLS over GRE helps you to create the GRE tunnel as hardware-based switched, and encapsulates EoMPLS frames within the GRE tunnel. The GRE connection is established between the two core routers, and then the MPLS label switched path (LSP) is tunneled over.
GRE encapsulation is used to define a packet that has header information added to it prior to being forwarded. De-encapsulation is the process of removing the additional header information when the packet reaches the destination tunnel endpoint.
When a packet is forwarded through a GRE tunnel, two new headers are added to the front of the packet and hence the context of the new payload changes. After encapsulation, what was originally the data payload and separate IP header are now known as the GRE payload. A GRE header is added to the packet to provide information on the protocol type and the recalculated checksum. A new IP header is also added to the front of the GRE header. This IP header contains the destination IP address of the tunnel.
The GRE header is added to packets such as IP, Layer 2 VPN, and Layer 3 VPN before the header enters into the tunnel. All routers along the path that receives the encapsulated packet use the new IP header to determine how the packet can reach the tunnel endpoint.
In IP forwarding, on reaching the tunnel destination endpoint, the new IP header and the GRE header are removed from the packet and the original IP header is used to forward the packet to the final destination.
The EoMPLS over GRE feature removes the new IP header and GRE header from the packet at the tunnel destination, and the MPLS label is used to forward the packet to the appropriate Layer 2 attachment circuit or Layer 3 VRF.
The scenarios in the following sections describe the L2VPN and L3VPN over GRE deployment on provider edge (PE) or provider (P) routers:
Provider Edge to Provider Edge Generic Routing EncapsulationTunnels
Provider to Provider Generic Routing Encapsulation Tunnels
Provider Edge to Provider Generic Routing Encapsulation Tunnels
Features Specific to Generic Routing Encapsulation
Features Specific to Ethernet over MPLS
Features Specific to Multiprotocol Label Switching Virtual Private Network Provider Edge to Provider Edge Generic Routing EncapsulationTunnels In the Provider Edge to Provider Edge (PE) GRE tunnels scenario, a customer does not transition any part of the core to MPLS but prefers to offer EoMPLS and basic MPLS VPN services. Therefore, GRE tunneling of MPLS traffic is done between PEs.
Provider to Provider Generic Routing Encapsulation Tunnels
In the Provider to Provider (P) GRE tunnels scenario, Multiprotocol Label Switching (MPLS) is enabled between Provider Edge (PE ) and P routers but the network core can either have non-MPLS aware routers or IP encryption boxes. In this scenario, GRE tunneling of the MPLS labeled packets is done between P routers.
Provider Edge to Provider Generic Routing Encapsulation Tunnels
In a Provider Edge to Provider GRE tunnels scenario, a network has MPLS-aware P to P nodes. GRE tunneling is done between a PE to P non-MPLS network segment.
Features Specific to Generic Routing Encapsulation
You should understand the following configurations and information for a deployment scenario:
Tunnel endpoints can be loopbacks or physical interfaces.
Configurable tunnel keepalive timer parameters per endpoint and a syslog message must be generated when the keepalive timer expires.
Bidirectional forwarding detection (BFD) is supported for tunnel failures and for the Interior Gateway Protocol (IGP) that use tunnels.
IGP load sharing across a GRE tunnel is supported.
IGP redundancy across a GRE tunnel is supported.
Fragmentation across a GRE tunnel is supported.
Ability to pass jumbo frames is supported.
All IGP control plane traffic is supported.
IP ToS preservation across tunnels is supported.
A tunnel should be independent of the endpoint physical interface type; for example, ATM, Gigabit, Packet over SONET (POS), and TenGigabit.
Up to 100 GRE tunnels are supported.
Features Specific to Ethernet over MPLS
Any Transport over MPLS (AToM) sequencing.
IGP load sharing and redundancy.
Port mode Ethernet over MPLS (EoMPLS).
Pseudowire redundancy.
Support for up to to 200 EoMPLS virtual circuits (VCs).
Tunnel selection and the ability to map a specific pseudowire to a GRE tunnel.
VLAN mode EoMPLS.
Features Specific to Multiprotocol Label Switching Virtual Private Network Support for the PE role with IPv4 VRF.
Support for all PE to customer edge (CE) protocols.
Load sharing through multiple tunnels and also equal cost IGP paths with a single tunnel.
Support for redundancy through unequal cost IGP paths with a single tunnel.
Support for the IP precedence value being copied onto the expression (EXP) bits field of the Multiprotocol Label Switching (MPLS) label and then onto the precedence bits on the outer IPv4 ToS field of the generic routing encapsulation (GRE) packet.
See the section, "Example: Configuring EoMPLS over GRE" for a sample configuration sequence of EoMPLS over GRE. For more details on EoMPLS over GRE, see the Deploying and Configuring MPLS Virtual Private Networks In IP Tunnel Environments document.
Overlay Tunnels for IPv6
The figure below illustrates how overlay tunneling encapsulates IPv6 packets in IPv4 packets for delivery across an IPv4 infrastructure (a core network or the Internet). By using overlay tunnels, you can communicate with isolated IPv6 networks without upgrading the IPv4 infrastructure between them. Overlay tunnels can be configured between border routers or between a border router and a host; however, both tunnel endpoints must support, IPv4 and IPv6 protocol stacks. IPv6 supports the following types of overlay tunneling mechanisms:
6to4
GRE
Intra-Site Automatic Tunnel Addressing Protocol (ISATAP)
IPv4-compatible
Manual
Figure 3
Overlay Tunnels
Note
If the basic IPv4 packet header does not have optional fields, overlay tunnels can reduce the maximum transmission unit (MTU) of an interface by 20 octets. A network that uses overlay tunnels is difficult to troubleshoot. Therefore, overlay tunnels that connect isolated IPv6 networks should not be considered as the final IPv6 network architecture. The use of overlay tunnels is considered as a transition technique for a network that supports either both IPv4 and IPv6 protocol stacks or just the IPv6 protocol stack.
Consult the table below to determine which type of tunnel you want to configure to carry IPv6 packets over an IPv4 network.
Table 1
Suggested Usage of Tunnel Types to Carry IPv6 Packets over an IPv4 Network Tunneling Type Suggested Usage Usage Notes
6to4
Point-to-multipoint tunnels that can be used to connect isolated IPv6 sites.
Sites use addresses that begin with the 2002::/16 prefix.
GRE/IPv4
Simple point-to-point tunnels that can be used within a site or between sites.
Tunnels can carry IPv6, Connectionless Network ServiceCLNS, and many other types of packets.
ISATAP
Point-to-multipoint tunnels that can be used to connect systems within a site.
Sites can use any IPv6 unicast addresses.
Manual
Simple point-to-point tunnels that can be used within a site or between sites.
Tunnels can carry IPv6 packets only.
Individual tunnel types are discussed in detail in the following concepts, and we recommend that you review and understand the information on the specific tunnel type that you want to implement. Consult the table below for a summary of the tunnel configuration parameters that you may find useful.
Table 2
Overlay Tunnel Configuration Parameters by Tunneling Type
Overlay Tunneling Type
Overlay Tunnel Configuration Parameter
Tunnel Mode
Tunnel Source
Tunnel Destination
Interface Prefix/Address
6to4
ipv6ip 6to4
An IPv4 address or a reference to an interface on which IPv4 is configured.
Not required. These are all point-to-multipoint tunneling types. The IPv4 destination address is calculated, on a per-packet basis, from the IPv6 destination.
An IPv6 address. The prefix must embed the tunnel source IPv4 address.
GRE/IPv4
gre ip
An IPv4 address.
An IPv6 address.
ISATAP
ipv6ip isatap
Not required. These are all point-to-multipoint tunneling types. The IPv4 destination address is calculated on a per-packet basis from the IPv6 destination.
An IPv6 prefix in modified eui-64 format. The IPv6 address is generated from the prefix and the tunnel source IPv4 address.
Manual
ipv6ip
An IPv4 address.
An IPv6 address.
IPv6 Manually Configured Tunnels
A manually configured tunnel is equivalent to a permanent link between two IPv6 domains over an IPv4 backbone. The primary use of a manually configured tunnel is to stabilize connections that require secure communication between two edge routers, or between an end system and an edge router. The manual configuration tunnel also stabilizes connection between remote IPv6 networks.
An IPv6 address is manually configured on a tunnel interface. Manually configured IPv4 addresses are assigned to the tunnel source and destination. The host or router at each end of a configured tunnel must support both the IPv4 and IPv6 protocol stacks. Manually configured tunnels can be configured between border routers or between a border router and a host. Cisco Express Forwarding switching can be used for manually configured IPv6 tunnels. Switching can be disabled if process switching is required.
Automatic 6to4 Tunnels
An automatic 6to4 tunnel allows isolated IPv6 domains to be connected over an IPv4 network to remote IPv6 networks. The key difference between automatic 6to4 tunnels and manually configured tunnels is that the tunnel is not point-to-point; it is point-to-multipoint. In automatic 6to4 tunnels, routers are not configured in pairs because they treat the IPv4 infrastructure as a virtual nonbroadcast multiaccess (NBMA) links. The IPv4 address embedded in the IPv6 address is used to find the other end of the automatic tunnel.
An automatic 6to4 tunnel may be configured on a border router in an isolated IPv6 network, which creates a tunnel on a per-packet basis on a border router in another IPv6 network over an IPv4 infrastructure. The tunnel destination is determined by the IPv4 address of the border router extracted from the IPv6 address that starts with the prefix 2002::/16, where the format is 2002:border-router-IPv4-address ::/48.The embedded IPv4 addresses are 16 bits and can be used to number networks within the site. The border router at each end of a 6to4 tunnel must support both IPv4 and IPv6 protocol stacks. 6to4 tunnels are configured between border routers or between a border router and a host.
The simplest deployment scenario for 6to4 tunnels is to interconnect multiple IPv6 sites, each of which has at least one connection to a shared IPv4 network. This IPv4 network could either be the Internet or a corporate backbone. The key requirement is that each site have a globally unique IPv4 address; the Cisco software uses this address to construct a globally unique 6to4/48 IPv6 prefix. A tunnel with appropriate entries in a Domain Name System (DNS) that maps hostnames and IP addresses for both IPv4 and IPv6 domains, allows the applications to choose the required address IPv6 traffic can be carried over IPv4 GRE tunnels by using the standard GRE tunneling technique to provide the services necessary to implement a standard point-to-point encapsulation scheme. GRE tunnels are links between two points, with a separate tunnel for each point. GRE tunnels are not tied to a specific passenger or transport protocol, but in case of IPv6 traffic, IPv6 is the passenger protocol, GRE is the carrier protocol, and IPv4 is the transport protocol.
The primary use of GRE tunnels is to provide a stable connection and secure communication between two edge devices or between an edge device and an end system. The edge device and the end system must have a dual-stack implementation.
GRE has a protocol field that identifies the passenger protocol. GRE tunnels allow intermediate system to intermediate system (IS-IS) or IPv6 to be specified as the passenger protocol, thereby allowing both IS-IS and IPv6 traffic to run over the same tunnel. If GRE does not have a protocol field, it becomes impossible to distinguish whether the tunnel is carrying IS-IS or IPv6 packets.